R12 page 9


Put differential grease on the eight balls and press them into the 90T 64dp spur gear. Take care that the bellevile washer is placed with it's concave side facing to the spur gear. The height adjusters fit very precisely into the bulkheads. Eight adjusters (0mm, 0.25mm, 0.5mm, 0.75mm, 1mm, 1.25mm, 1.5mm, 1.75mm) are included.
The left side can be seen here.

Other Parts

Servo mounts, turnbuckles, servo saver, antenna, screws for the motor and wheels (no tires) are included in the kit.

previous page
more photos